Serving Nassau & Suffolk Counties
Hear from Our Customers
Your $20,000 driveway stays put. Your landscaping doesn’t get ripped apart. Your daily routine continues without a construction zone blocking your garage for two weeks.
That’s what trenchless directional drilling in North Merrick, NY does—it gets utility lines where they need to go without the mess traditional excavation leaves behind. We’re talking water lines, gas lines, electric, even cable, all installed underground with precision equipment that drills horizontally beneath the surface.
The cost difference is real. Traditional dig-and-replace projects in Nassau County typically run $10,000 to $20,000 just in restoration after the work is done. Trenchless methods cut that by 30-50% because there’s nothing to restore. Your property looks the same when we leave as it did when we arrived.
And if you’re thinking about winter work, this matters even more. Frost lines here hit 3+ feet deep, which means traditional pipe repair in cold months can cost 200-300% more due to frozen ground and specialized equipment. Horizontal directional drilling works year-round without that markup.
Allied All City has been handling underground utility work in North Merrick, NY since 1983. That’s over 40 years of knowing how Nassau County soil behaves, what the permit process actually requires, and how to route lines around the obstacles that exist under suburban properties here.
We don’t subcontract the drilling work. Our crews bring the specialized directional drilling equipment to your property and handle the entire installation. That means one point of contact, one company accountable for the outcome, and no coordination headaches for you.
We’ve worked with homeowners, property managers, plumbers, electricians, and general contractors throughout North Merrick. The repeat business comes from doing it right the first time and not leaving a mess behind.
First, we locate existing utilities on your property using detection equipment. This prevents any accidental hits during drilling and maps out the cleanest path for your new line.
Next, we drill a small pilot hole from the entry point to the exit point using a steerable drill head. The operator guides this drill bit underground—often within an inch of the target location—using real-time tracking technology. You’re not guessing where the line ends up.
Once the pilot hole is complete, we attach the new utility line (water, gas, electric, whatever you’re installing) to the drill head and pull it back through the same path. The line gets seated underground exactly where it needs to be, and we make the final connections at each end.
The entry and exit points are small—usually just enough space to access the drill and pull the line through. We’re not excavating a trench across your yard or driveway. Most residential projects in North Merrick wrap up in a day or two, depending on distance and utility type. Then we backfill the small access points, and you’re done.
Ready to get started?
Trenchless directional drilling services in North Merrick, NY handle multiple utility types: water lines, gas lines, electric, cable, and fiber optic. If it needs to run underground from point A to point B without open trenching, this method works.
For water line directional drilling, we’re often running new service lines from the street to the house or adding lines to outbuildings, pools, or irrigation systems. The process avoids tearing up driveways, walkways, and landscaping that would otherwise sit directly in the path of a traditional trench.
Trenchless gas line installation follows the same approach. Gas lines require precision depth and placement to meet code, and directional drilling gives us that control without surface disruption. This is especially useful in North Merrick, where property values average $644,700 and homeowners aren’t looking to destroy expensive hardscaping for a utility upgrade.
The environmental impact is lower, too. No large-scale soil displacement, no erosion issues, and minimal disturbance to tree roots or existing landscape features. For properties with mature landscaping or limited access, this method is often the only practical option that doesn’t require removing fences, gates, or established plantings.
The drilling itself might run similar to traditional excavation, but the total project cost is typically 30-50% less because you’re eliminating most restoration expenses. Traditional open-cut projects in Nassau County often add $10,000 to $20,000 in costs just to repair driveways, walkways, landscaping, and other surfaces after the trench is backfilled.
With trenchless methods, there’s no driveway to repave, no landscaping to replant, and no lawn to resod. You’re paying for the installation and two small access points—that’s it. For North Merrick homeowners already facing $20,000 annual property taxes, that cost difference matters.
Winter projects show even bigger savings. Traditional pipe work during cold months can cost 200-300% more due to frozen ground and specialized equipment rentals. Directional drilling works year-round without that seasonal markup.
Yes. That’s exactly what horizontal directional drilling is designed to do. We drill beneath your driveway, not through it, so the surface stays intact from start to finish.
The process uses a steerable drill head that creates a horizontal path underground. We start from one side of the driveway (or wherever access makes sense), drill to the other side, and pull the water line through. The only surface work involves small entry and exit points—typically a few square feet each—which we backfill and restore after the line is in place.
This works for asphalt driveways, concrete driveways, paver driveways, and any other hardscape you don’t want torn up. Most residential water line installs in North Merrick take one to two days, and your driveway remains usable throughout the process. No weeks-long closure, no repaving costs, no waiting for contractors to come back and fix what got destroyed.
Most residential projects in North Merrick wrap up in one to two days, depending on the distance and utility type. That includes locating existing lines, drilling the path, pulling the new line through, and making final connections.
Commercial projects or longer runs might take a few days, but you’re still looking at a fraction of the time traditional excavation requires. Open-cut methods involve digging the trench, installing the line, backfilling, compacting, and then scheduling separate contractors to repair driveways, landscaping, or other surfaces. That process can stretch over a week or more, with multiple crews and weather-dependent timelines.
Directional drilling condenses the work into a continuous process with one crew and one set of equipment. There’s no waiting for backfill to settle or coordinating with a paving company two weeks later. We complete the installation, restore the small access points, and you’re done.
Water lines, gas lines, electric, cable, fiber optic—pretty much any utility that runs underground can be installed using directional drilling. The method works for new installations, replacements, and adding service to areas of your property that don’t currently have access.
For water line directional drilling in North Merrick, common projects include running new service lines from the street, adding water access to pools or outdoor kitchens, and connecting outbuildings or guest houses. Trenchless gas line installation follows the same process for adding gas service to appliances, fire pits, or detached structures.
Electric and cable installations use directional drilling when the path crosses driveways, landscaping, or other obstacles you don’t want disturbed. The precision of the equipment lets us route lines around existing utilities, tree roots, and underground obstructions without trial-and-error digging. That’s especially useful on North Merrick properties where decades of landscaping and prior utility work create a crowded underground environment.
Yes. Directional drilling equipment handles frozen ground far better than traditional excavation, which is why it’s become the go-to method for winter utility work in Nassau County.
Traditional open-cut projects in winter face serious cost increases—often 200-300% more—because frozen soil requires specialized equipment like hydraulic breakers and frost-cutting teeth that rent for $450+ per day. Even then, progress is slow, and the process tears up your property just as badly as it would in warmer months.
Horizontal directional drilling avoids most of that. The drill head works underground where soil temperatures stay more stable, and the equipment is designed to handle varying ground conditions without the same cost penalties. North Merrick’s frost line reaches 3+ feet deep in winter, but directional drilling operates below that depth as a standard practice. You’re not paying extra to deal with frozen surface soil because we’re not working at the surface.
Modern directional drilling equipment can place a line within an inch of the target location using real-time tracking technology. The drill head sends a signal to a receiver above ground, which shows the operator exactly where the bit is, how deep it’s running, and what angle it’s traveling.
This precision matters when you’re threading a line between existing utilities, avoiding tree roots, or hitting a specific connection point on the other side of your property. There’s no guesswork involved—the operator adjusts the drill path as needed to stay on target throughout the entire run.
For North Merrick properties with limited space, established landscaping, or multiple existing utilities, that accuracy is what makes trenchless directional drilling practical. Traditional trenching requires a wide margin for error and often involves exploratory digging just to confirm what’s underground. Directional drilling maps the path first, then executes it with precision equipment designed for exactly this type of work.
Local Resources
Other Services we provide in North Merrick