Hear from Our Customers
You’ve seen what traditional excavation does. Torn-up driveways. Destroyed landscaping. Weeks of disruption. That’s not what happens here.
Trenchless directional drilling in Lake Success, NY means we create a small entry point and a small exit point. Everything in between stays untouched. Your established trees, your garden beds, your brick pavers, your concrete driveway—all of it remains exactly as it is.
Most water line directional drilling projects wrap up in a single day. You’re looking at 4-8 hours of actual work, not weeks of your property being a construction zone. No massive restoration bills afterward because there’s nothing to restore.
The pipes we install—HDPE, high-density polyethylene—are built to last 50 to 100 years. They’re corrosion-resistant and flexible enough to handle ground movement without cracking. You’re not just avoiding a mess today. You’re installing infrastructure that won’t need replacement in your lifetime.
We’re a family-owned plumbing and environmental services company serving Nassau and Suffolk Counties for over 40 years. We’re not subcontracting your job. Our technicians show up, assess your property, and handle the work from start to finish.
Lake Success properties—especially older homes built before 1980—often have galvanized steel or lead pipes that are corroding from the inside. We’ve replaced hundreds of water and gas lines in this area. We know the soil conditions, the local codes, and what it takes to get the job done right without tearing your property apart.
You’re working with a BBB-accredited business that’s fully licensed and insured. We’ve invested in the specialized directional drilling equipment needed to do this work properly, and we’re not learning on your dime.
We start with a small entry pit where the new line will begin and a small exit pit where it will end. These are typically just a few feet wide—nothing like the trenches you’re imagining.
The directional drill goes underground at the entry point, following a carefully mapped path beneath your driveway, landscaping, or whatever’s in the way. We use advanced steering technology with downhole sensors to control the drill’s path with precision. The bore stays open and lubricated with a mixture of water and bentonite clay, which is non-toxic and environmentally safe.
Once the drill reaches the exit point, we attach the new water line or gas line to the drill head. Then we pull it back through the bore, installing the pipe in one continuous length. No joints underground. No weak points.
When we’re done, you have a new utility line installed exactly where it needs to be, and your property looks the same as when we arrived. We backfill the small entry and exit pits, and that’s it. You’re back to normal.
Ready to get started?
This isn’t just about avoiding a mess. It’s about getting a better result with less disruption and lower total cost.
When you install a water line without digging up your driveway, you’re not paying twice—once for the plumbing work and again for driveway restoration. Traditional excavation means breaking concrete, removing it, trenching, backfilling, and then repaving. That’s thousands of dollars in restoration costs that you simply don’t have with trenchless directional drilling in Lake Success, NY.
Many Lake Success properties have mature landscaping that took years to establish. Directional drilling preserves that investment. Your trees don’t get damaged. Your irrigation system stays intact. Your property value isn’t impacted by a torn-up yard.
The process is also faster, which matters if you’re dealing with low water pressure or a failing line. Most jobs are completed in a day, and your water service is restored immediately. You’re not waiting weeks for contractors to finish excavation, then more weeks for restoration work.
Nassau County has specific regulations for utility work, and we handle all the compliance requirements. You’re getting a permitted, inspected installation that meets local codes and safety standards.
The drilling itself might cost slightly more per linear foot than open-cut trenching. But that’s not the number that matters.
Traditional excavation means you’re paying for the plumbing work plus all the restoration. If we have to dig through your driveway, you’re looking at concrete removal, disposal, backfill, and repaving. That can easily add $3,000 to $8,000 to your total bill, depending on the size of the area affected.
With trenchless directional drilling in Lake Success, NY, there’s no restoration work. We make two small access points and everything in between stays untouched. When you factor in the total project cost—not just the pipe installation—directional drilling almost always comes out ahead. You’re also avoiding the indirect costs: time off work to manage contractors, temporary loss of property access, and the headache of coordinating multiple trades for restoration.
Yes. That’s exactly what horizontal directional drilling was designed to do.
We drill beneath your driveway at a depth that keeps the bore well below the surface—typically 3 to 5 feet down, depending on the line we’re installing and local frost depth requirements. The drill never comes close to your driveway’s surface. Your concrete or asphalt stays completely intact.
The entry and exit points are located outside the paved area—usually in your yard near the curb and near your house foundation. We’re not breaking through your driveway at any point. The new water line runs underneath it in one continuous length, with no joints or connections underground that could fail later. This is standard work for us in Lake Success, NY, where most properties have established driveways and landscaping that homeowners want to preserve.
Most residential gas line installations using directional drilling are completed in 4 to 8 hours. You’re looking at a single-day project in almost all cases.
The timeline depends on the distance we’re covering and what we’re drilling through. Soil conditions in Nassau County are generally favorable for directional drilling—mostly sand and clay, without the bedrock issues you’d see in other regions. That keeps the work moving efficiently.
We show up in the morning, set up the equipment, complete the bore, pull the new gas line through, make the connections, and backfill the small access pits. By afternoon, you have a new gas line installed and your property looks normal. Compare that to traditional excavation, which can take several days for the digging alone, plus additional time for restoration work. The speed is one of the biggest practical benefits of trenchless directional drilling in Lake Success, NY.
We primarily install HDPE pipes—high-density polyethylene—for water lines. For gas lines, we use PE pipes that meet local utility standards and code requirements.
HDPE is the ideal material for trenchless installation because it’s flexible, durable, and comes in long continuous lengths. That means we can pull several hundred feet of pipe through a single bore without any underground joints. No joints means no weak points where leaks could develop years down the road.
These pipes are also corrosion-resistant, which matters in Lake Success, NY, where many older homes are dealing with corroded galvanized steel or deteriorating lead pipes. HDPE won’t rust, won’t leach contaminants into your water, and has a lifespan of 50 to 100 years. You’re installing infrastructure that will outlast most other components of your home’s plumbing system. The flexibility also allows the pipe to handle ground movement from freeze-thaw cycles without cracking, which is a common failure point for rigid materials.
Yes, but it requires careful planning and locating before we drill.
Before any directional drilling project in Lake Success, NY, we have all existing utilities marked. That includes electric, gas, water, sewer, cable, phone, and irrigation lines. This is standard procedure and required by law. We use the utility locate service to identify what’s underground and where.
Once we know what’s there, we map a drill path that avoids existing utilities. Modern directional drilling equipment gives us precise control over depth and direction. We’re not guessing where the drill is—we’re tracking it in real time with downhole sensors and adjusting as needed.
In some cases, the presence of existing utilities means we need to drill deeper or adjust the entry and exit points. That’s all part of the planning process. The key point is that directional drilling is actually safer for existing utilities than traditional excavation, because we’re not creating a wide trench that exposes everything in the area. We’re creating a targeted bore along a specific path, and we know exactly where that path is at all times.
Most properties in Lake Success, NY are good candidates. The main factors are the distance we need to cover, the soil conditions, and what’s in the way.
Directional drilling works well for residential water line and gas line installations up to a few hundred feet. If you’re replacing a service line from the street to your house, that’s typically 50 to 150 feet—well within the range where this method makes sense.
Soil conditions here are generally favorable. We’re dealing with sand, clay, and some gravel—all materials that directional drilling handles easily. If you had solid bedrock close to the surface, that would be a different conversation, but that’s not common in Nassau County.
The biggest advantage shows up when you have obstacles in the way: an established driveway, mature landscaping, a patio, or a long run from the street to your house. Those are the situations where traditional excavation becomes extremely disruptive and expensive. If your property has any of those features, trenchless directional drilling in Lake Success, NY is almost certainly the better option. We can assess your specific situation and give you a clear answer after a quick site visit.
Other Services we provide in Lake Success