Serving Nassau & Suffolk Counties
Hear from Our Customers
Traditional excavation means cutting through everything in the path. Your driveway gets torn up. Your landscaping gets destroyed. Your sprinkler system gets damaged. Then you’re paying twice—once for the utility installation and again to repair everything that got wrecked in the process.
Trenchless directional drilling in Glen Head, NY changes that equation completely. We bore underground pathways using specialized equipment that creates a pilot hole, then pulls the new pipe through without surface disruption. Your asphalt stays intact. Your garden beds remain untouched. Your property looks the same when we leave as it did when we arrived.
This matters especially in Glen Head, where many homes have mature landscaping and established driveways that cost thousands to replace. You’re not just saving money on restoration—you’re avoiding weeks of living with a torn-up property while contractors rebuild what got destroyed. The work gets done faster, cleaner, and with far less stress on your end.
Allied All City has handled trenchless installations across Nassau County since 1983. We’re not a franchise or a national chain—we’re a family-owned operation that’s been solving underground utility problems for Glen Head property owners for over 40 years.
That longevity matters because Long Island’s soil conditions, water table issues, and coastal environment create challenges that require local knowledge. We’ve installed lines under driveways ranging from 50 feet to 900 feet. We’ve worked around tree roots, navigated rocky soil, and handled installations where traditional excavation would have been prohibitively expensive or physically impossible.
You’re working with people who’ve seen every scenario this area can throw at a utility installation. We know what works in Glen Head’s specific conditions, and we have the equipment and experience to handle it correctly the first time.
We start by locating all existing utilities on your property to map out the safest path for the new line. This prevents damage to existing infrastructure and ensures we’re not creating problems while solving one.
Next, we drill a small pilot hole along the planned route using a specialized boring head. This equipment uses water pressure and precision guidance technology that can direct the drill bit to within an inch of the target location. We’re creating an underground pathway that follows the exact route needed—even if that means curves, angles, or navigating around obstacles.
Once the pilot hole reaches the exit point, we attach the new pipe to the boring equipment and pull it back through the pathway we just created. The pipe gets installed in one continuous run, which means fewer connection points and less chance of future leaks or failures.
The entire process for water line directional drilling in Glen Head, NY typically completes in a day or two, depending on distance and soil conditions. You get a permanent installation without the weeks of disruption that come with traditional trenching methods.
Ready to get started?
Our trenchless directional drilling services in Glen Head, NY handle water lines, sewer lines, gas lines, electrical conduit, and communication cables. The method works for residential properties, commercial sites, and anywhere you need to install underground utilities without surface disruption.
You’re getting installations that handle pipe diameters from small residential water services to larger commercial applications. The technology allows us to pull pipes at angles and navigate around existing obstacles that would stop traditional excavation methods cold.
This matters particularly for Glen Head properties with aging infrastructure. Many homes in this area have original sewer lines from the 1950s and 1960s that are reaching end of lifespan. Long Island’s salt air accelerates corrosion on older cast iron pipes faster than inland areas. When those lines fail, you need replacement options that don’t require tearing up 40 years of established landscaping.
The same applies to water line installations. If your service line runs under a newly paved driveway or through landscaped areas, trenchless methods let you install water lines without digging up the driveway or destroying the landscaping you’ve invested in. You get modern, durable infrastructure without the collateral damage.
The cost depends primarily on distance and soil conditions, but most residential water line installations in Glen Head run between $4,000 and $8,000 for trenchless methods. That’s often comparable to or less than traditional excavation when you factor in restoration costs.
Here’s why: traditional excavation might quote lower for the actual pipe installation, but then you’re paying separately to repave your driveway, replace landscaping, repair sprinkler systems, and fix any other damage caused by digging a trench. Those restoration costs frequently exceed the original installation cost.
Trenchless directional drilling eliminates those secondary expenses entirely. The price you’re quoted covers the complete installation without additional restoration work. You’re also avoiding the indirect costs—taking time off work to manage contractors, living with a torn-up property for weeks, and dealing with the stress of a major excavation project. For most Glen Head homeowners, the total cost and hassle factor makes trenchless installation the more economical choice.
Yes, and it’s not even particularly difficult with the right equipment. We drill entry and exit pits on either side of your driveway—usually small access points in the lawn or landscaped areas. The boring equipment creates an underground pathway that runs beneath the driveway at a depth that clears the foundation and any utilities.
The key is precision guidance technology. Modern horizontal directional drilling equipment in Glen Head, NY uses tracking systems that show exactly where the drill head is located underground. We’re not guessing or hoping we end up in the right spot—we’re actively steering the drill bit along the planned route.
Your driveway experiences zero impact because we’re working entirely below it. No cutting, no digging, no surface disruption. When the job’s complete, you won’t see any evidence that work was done except for the small entry and exit points, which we restore to match the surrounding landscape. This is especially valuable for newer driveways or decorative paving where replacement would be expensive and visually obvious.
Most residential installations complete in one to two days. Longer runs or more complex routes might extend to three days, but you’re still looking at a fraction of the time required for traditional excavation and restoration.
The timeline breaks down like this: Day one typically involves site assessment, utility location, and drilling the pilot hole. Day two covers pulling the pipe through and completing connections. If we’re working with longer distances or challenging soil conditions, we might need additional time for the drilling phase.
Compare that to traditional methods, where excavation might take a day, pipe installation another day, then you’re waiting for inspections before restoration work can even begin. Repaving a driveway requires scheduling a paving contractor. Landscaping restoration is another separate contractor and timeline. You’re easily looking at two to three weeks of total project duration with traditional excavation. Trenchless methods compress that entire timeline into a couple of days with no restoration phase needed.
We install water service lines, sewer lines, gas lines, electrical conduit, and communication cables using horizontal directional drilling in Glen Head, NY. The method works with various pipe materials including PEX, HDPE, copper, and steel, depending on the application and local code requirements.
For water lines, PEX has become increasingly popular because it’s flexible, durable, and well-suited to directional drilling installations. It handles the pulling process well and offers excellent longevity. For sewer applications, we typically use HDPE or PVC depending on diameter requirements and local specifications.
Gas line installations follow strict safety codes and typically use approved steel or HDPE materials rated for gas service. The trenchless method actually offers advantages for gas lines because the continuous run means fewer connection points where leaks could potentially develop. Each application gets matched to the appropriate pipe material based on what you’re installing, local code requirements, and site-specific conditions. We’ll walk through the options during the initial assessment so you understand exactly what’s going into the ground and why.
Yes, though these conditions require more powerful equipment and sometimes affect the timeline. Long Island soil varies significantly—you might have sandy conditions in one area and hit hardpan clay or rock shelves 20 feet away. Glen Head properties often have mature trees with extensive root systems that create additional obstacles.
Our boring equipment handles these challenges using specialized boring heads designed for different soil conditions. Rocky soil requires more aggressive cutting heads and higher torque. Tree roots get navigated by adjusting the bore path to go under or around major root structures when possible.
The key difference from traditional excavation is that we’re creating a much smaller disturbance underground. Instead of digging a trench that severs every root in the path, we’re boring a pathway that minimizes root damage. This is better for your trees and better for your property. In cases where soil conditions are particularly challenging, the project might take an extra day, but you’re still avoiding the extensive excavation and restoration that traditional methods would require in the same conditions.
Most properties in Glen Head, NY can accommodate trenchless directional drilling, but the best way to know for certain is a site assessment. We look at the distance involved, existing utilities, soil conditions, and any obstacles between the entry and exit points.
The main factors that affect feasibility are available space for entry and exit pits, depth requirements, and existing underground obstacles. If you have utilities running along the same path where the new line needs to go, we need enough vertical or horizontal clearance to safely bore around them. If the distance is extremely long or the route requires multiple sharp turns, that affects equipment selection and approach.
What rules out trenchless methods is rare. Usually it’s situations where there’s literally no physical space to set up equipment, or where existing underground structures create impossible obstacles. Even then, we can often find alternative routing that makes trenchless installation viable. The site assessment is free and gives you a definitive answer about whether your specific property and project work for directional drilling, along with an accurate cost estimate based on actual site conditions rather than rough guesses.
Local Resources
Other Services we provide in Glen Head