Serving Nassau & Suffolk Counties
Hear from Our Customers
You’re looking at a completely new sewer line installed through the path of your old one. No trenches across your property. No weeks of waiting for contractors to fill holes and reseed grass. No paying twice—once for the pipe, again for everything we tore up to reach it.
The new pipe is seamless HDPE—high-density polyethylene. It doesn’t crack from tree roots. It doesn’t corrode from chemicals or waste. It’s rated for over a century of use, which means this is likely the last time you’ll deal with this problem.
Most trenchless sewer line replacement in Riverside, NY wraps up in one to three days. You’ll see two small access pits—one where the old pipe starts, one where it ends. Everything else stays undisturbed. When we leave, your property looks the same as when we arrived, except now your sewer works like it should.
We’ve handled sewer and water line work across Nassau and Suffolk counties for over 40 years. We’re not new to trenchless technology, and we’re not experimenting with your property to figure it out.
Riverside’s housing stock reflects the area’s long history—plenty of homes built decades ago on infrastructure that’s even older. That’s exactly the kind of work we see daily. Collapsed sewer pipe repair in Riverside, NY isn’t unusual for us. It’s what we do.
You’ll work with a family-owned company that shows up when we say we will, does the work without the runaround, and backs it up with real guarantees. We’re licensed, insured, and available 24/7 if something goes wrong outside business hours.
First, we locate your existing sewer line and dig two small access pits—typically one near your house and one near the street connection. These pits are just big enough to reach the pipe. No need to excavate your entire yard.
Next, we insert a cone-shaped bursting head into the old pipe. This head is slightly larger than your existing pipe diameter. As we pull it through using hydraulic machinery, it fractures the old pipe outward into the surrounding soil. At the same time, a new HDPE pipe is pulled in directly behind the bursting head, filling the space.
The old pipe gets pushed aside. The new pipe takes its place. Once the new line is connected at both ends, we backfill the access pits, compact the soil, and clean up. You’re left with a brand-new sewer line and a yard that doesn’t look like a construction zone.
This is how trenchless pipe replacement under foundation in Riverside, NY gets done without jackhammering through concrete or ripping up landscaping. The process works whether your line runs under a driveway, patio, or mature trees you’d rather not lose.
Ready to get started?
You get a full camera inspection before we start. That shows us exactly where the damage is, what caused it, and whether pipe bursting is the right fix. If tree roots cracked your line or the pipe collapsed from age, you’ll see it on the footage.
We handle all the permits and coordinate with local requirements in Riverside, NY. You don’t need to call the town or figure out code compliance. That’s on us.
The job includes excavation of access pits, hydraulic pipe bursting, installation of the new HDPE pipe, reconnection to your existing system, backfill, and site cleanup. We also test the new line to confirm proper flow and connection before we leave.
Riverside’s aging infrastructure means plenty of properties still have cast iron or clay sewer lines installed 50, 60, even 70 years ago. Those materials break down. They crack under pressure. They let roots in. If that’s what you’re dealing with, replacing the sewer line without digging up your yard in Riverside, NY makes sense—you’re not just patching the problem, you’re replacing it with something that won’t fail again in your lifetime.
Most trenchless pipe bursting projects in Riverside, NY run between $150 and $190 per linear foot. That’s higher than traditional dig-and-replace at first glance, but it doesn’t include the restoration costs you’d face with excavation.
When you trench across a yard, you’re also paying to replace sod, reseed grass, repair sprinkler lines, and fix any hardscaping that got torn up. Those costs add up fast—often thousands of dollars on top of the pipe work itself. Trenchless methods eliminate most of that expense because there’s no trench to restore.
The total cost depends on how long your sewer line is, how deep it sits, and what’s in the way. If your line runs under a driveway or patio, trenchless becomes even more cost-effective since you’re not paying to demolish and rebuild concrete. We’ll give you a clear estimate after the camera inspection so you know exactly what you’re looking at.
Most jobs finish in one to three days, start to finish. That includes digging the access pits, bursting the old pipe, installing the new one, and filling everything back in.
Compare that to traditional excavation, which can take a week or more—and that’s just the pipe work. Add another week or two for landscape restoration, and you’re looking at a month-long disruption. Trenchless sewer replacement in Riverside, NY gets you back to normal fast.
Weather rarely slows us down either. Because we’re not digging a massive trench, we can work in conditions that would shut down a traditional crew. Frozen ground in January? Not a problem. Wet soil in spring? We’ll still get it done. The process is built to handle real-world conditions without delays.
Yes. That’s one of the main reasons trenchless pipe replacement under foundation in Riverside, NY exists. When your sewer line runs beneath a basement floor, concrete slab, or building foundation, traditional excavation means breaking through concrete, digging down several feet, replacing the pipe, then pouring new concrete and waiting for it to cure.
Pipe bursting skips all of that. We access the line from outside the foundation—usually from a cleanout or an exterior access point—and pull the new pipe through without touching your basement or slab. The bursting head does the work underground, and your foundation stays intact.
This is especially useful in older Riverside homes where sewer lines were installed before the foundation was poured, or where the line runs directly under an addition. You’re not stuck choosing between a broken sewer and a demolished floor. There’s a third option, and it’s faster and cheaper than you’d expect.
The old pipe gets fractured into pieces and pushed outward into the soil around it. It stays underground—there’s no need to remove it. The bursting head breaks it apart as it moves through, and the fragments compact into the surrounding earth.
This works because the new pipe is pulled in immediately behind the bursting head, taking up the space where the old pipe used to be. The soil naturally compacts around the new HDPE line, holding it in place. There’s no gap, no void, and no settling issues.
If your old pipe was clay or cast iron—common in Riverside, NY—it fractures cleanly. PVC can also be burst, though it requires a bit more force. Either way, the result is the same: a new, seamless pipe in the exact path of the old one, with no leftover mess to dig up or haul away.
No. The new HDPE pipe is solid, seamless, and flexible. There are no joints for roots to penetrate, and the material itself doesn’t crack under pressure the way clay or cast iron does.
Tree roots caused problems with your old pipe because those materials had seams, gaps, or weak points where moisture could escape. Roots grow toward water, and once they found a crack, they forced their way in. Over time, that turned a small crack into a collapsed section.
HDPE doesn’t give roots that opportunity. It’s a single continuous pipe with no seams along its length. Even if roots press against it from the outside, the pipe flexes slightly without breaking. That’s why it’s rated for 100+ years of use—it’s built to handle ground movement, root pressure, and soil shifts without failing. Once your new line is in, root intrusion isn’t something you’ll deal with again.
No, but you won’t be able to use your plumbing while we’re working. That means no flushing toilets, running sinks, or using the washing machine until the new pipe is connected and tested.
For most jobs, that’s a matter of hours—not days. We work efficiently, and once the new line is in place and reconnected, your plumbing is back in service. If you’d rather not deal with the inconvenience, you can step out for the day. But there’s no safety reason to leave, and most homeowners stick around to see the process.
If the job runs longer than a single day, we’ll make sure your sewer is functional overnight. We’re not going to leave you without working plumbing between shifts. The goal is to get you back to normal as quickly as possible with as little disruption as we can manage.
Local Resources
Other Services we provide in Riverside